HAMPTONe

Tube Microphone Power Supplies: TMPS MK2: In Stock $539-549

 

The MK2 is an updated version of our Previous TMPS line we carried for over a decade. The new chassis is steel, with a separate compartment for the AC section. The electronics are very similar to our previous model, with a handful of improvements.

FEATURES:

• 3 standard models cover almost every microphone* (see bottom of page for details)
• Ramping, precision regulation combined with passive filtering, safer for microphone and capsule, quieter
• 110 or 220/240 internally switchable
• Rugged, compact, and stylish enclosure
• RF and Transient voltage protected AC input
• Custom wired to appropriate mic (i.e. pin for pin with mic), included in price
• All Gold Neutrik connectors
• Pattern selector on TMPS1X is a 9 Position stepped military grade sealed switch.
• Cables available for additional cost (see bottom of this page).
• Weight: 5lbs, 2.3Kg
• Dimensions: Length = 9", Width = 4.2", Height with handle = 4.5", with handle off = 3.5"

MODELS (click on pictures for details):

	TMPS1: KM5x, KM64, U47, U67, C61, M582, CMV-563, CMV3... most microphones without remote pattern selection
	TMPS2: Same as TMPS1x 2 channels. Not available for U47, U67, or mics with pattern selection.
	TMPS1X: Remote pattern selecting microphones, M49, M269, UM57, C12, C12A & B.

FIELD CALIBRATION, FILAMENT / PLATE VOLTAGE

TUBE MIC CABLES

• NON PATTERN SELECTING CABLES: 18 foot 5 pin gold XLR connectors + Gotham GAC7 cable = $75 USD
• PATTERN SELECTING CABLES: 18 foot 7 pin gold XLR connectors + Gotham GAC7 cable = $125 USD
• KM54 CABLES: New Amphenol-Tuchel (mates with mic) to 5 pin gold XLR = $100

Longer lengths available at minimal extra cost. Special connectors (provided by customer) mounted at no additional cost. Due to availability, we do not source vintage connectors at this time.

 

* Known Microphones the TMPS supplies cannot power:

AKG C60, Sony C37A, Lomo 19A9

A handful of microphones have the output transformer to the audio circuit in the power supply. These will not work with the TMPS supplies that provide clean regulated power, but do not contain any audio circuitry other than the output connector. Custom making a supply for these mics would be very cost prohibitive, so we recommend you look for the original.